Free CCNA 200-301 Dumps 2026

 

An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used?

A. switchport trunk allowed vlan 10
B. switchport trunk native vlan 10
C. switchport mode trunk
D. switchport trunk encapsulation dot1q

 

 

What is a role of wireless controllers in an enterprise network?

A. centralize the management of access points in an enterprise network
B. support standalone or controller-based architectures
C. serve as the first line of defense in an enterprise network
D. provide secure user logins to devices on the network.

 

 

What is the maximum bandwidth of a T1 point-to-point connection?

A. 1.544 Mbps
B. 2.048 Mbps
C. 34.368 Mbps
D. 43.7 Mbps

 

 

Refer to the exhibit. Which switch becomes the root of the spanning tree for VLAN 110?

A. Switch 1
B. Switch 2
C. Switch 3
D. Switch 4

 

 

Where does a switch maintain DHCP snooping information?

A. in the MAC address table
B. in the CAM table
C. in the binding database
D. in the frame forwarding database

 

 

Refer to the exhibit. What is represented by “R1” and “SW1” within the JSON output?

A. key
B. array
C. value
D. object

 

Refer to the exhibit. Which configuration must be applied to the router that configures PAT to translate all addresses in VLAN 200 while allowing devices on VLAN 100 to use their own IP addresses?

A. Router1(config)#access-list 99 permit 192.168.100.32 0.0.0.31
Router1(config)#ip nat inside source list 99 interface gi1/0/0 overload
Router1(config)#interface gi2/0/1.200
Router1(config)#ip nat inside
Router1(config)#interface gi1/0/0
Router1(config)#ip nat outside

B. Router1(config)#access-list 99 permit 192.168.100.0 0.0.0.255
Router1(config)#ip nat inside source list 99 interface gi1/0/0 overload
Router1(config)#interface gi2/0/1.200
Router1(config)#ip nat inside
Router1(config)#interface gi1/0/0
Router1(config)#ip nat outside

C. Router1(config)#access-list 99 permit 209.165.201.2 255.255.255.255
Router1(config)#ip nat inside source list 99 interface gi1/0/0 overload
Router1(config)#interface gi2/0/1.200
Router1(config)#ip nat inside
Router1(config)#interface gi1/0/0
Router1(config)#ip nat outside

D. Router1(config)#access- list 99 permit 209.165.201.2 0.0.0.0
Router1(config)#ip nat inside source list 99 interface gi1/0/0 overload
Router1(config)#interface gi2/0/1.200
Router1(config)#ip nat inside
Router1(config)#interface gi1/0/0
Router1(config)#ip nat outside

 

 

Which CRUD operation corresponds to the HTTP GET method?

A. read
B. update
C. create
D. delete

 

 

Refer to the exhibit. Which prefix did router R1 learn from internal EIGRP?

A. 192.168.10/24
B. 192.168.3.0/24
C. 192.168.2.0/24
D. 172.16 1.0/24

 

 

Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. what is the reason for the problem?

A. The OSPF router IDs are mismatched.
B. Router2 is using the default hello timer.
C. The network statement on Router1 is misconfigured.
D. The OSPF process IDs are mismatched.